About This Guide; Copyright Statement; Important Notices - Radiodetection RD7000 User Manual

Preface

About this guide

This guide provides basic operating instructions for the RD7000 receiver and transmitter.
Please read this guide in its entirety before attempting to operate the RD7000.
This guide is intended as a portable reference only. For detailed instructions, please
refer to the RD7000 operation manual, which is available for download from
www.radiodetection.com. To download the manual go to the Library section, which
is accessible via the menu; next go to Cable and Pipe Locators and then select User
Manuals and click the RD7000 Operation Manual link.
The online User Manual library also contains links to the Centros™ Manager manual.

Copyright statement

Copyright 2008 Radiodetection Ltd - SPX Corporation. All rights reserved.
Radiodetection is a subsidiary of SPX Corporation.
SPX and Radiodetection are trademarks of Radiodetection Ltd. and SPX Corporation.
Due to a policy of continued development, we reserve the right to alter or amend any
published specification without notice.
Copyright 2008 Radiodetection Ltd - SPX Corporation.
This document is protected by copyright and may not be copied, reproduced,
transmitted, modified or used, in whole or in part, without the prior written consent of
Radiodetection Ltd.
Trademarks
RD7000, RD8000, RD4000, flexitrax, SurveyCERT, StrikeAlert, SideStep and eCAL are
trademarks of Radiodetection Ltd.

Important notices

When reporting any problems to your Radiodetection Dealer or Supplier it is important to
quote the unit serial number and the purchase date.
WARNING! This equipment is NOT approved for use in areas where hazardous
gases may be present.
WARNING! When using the transmitter, switch off the unit and disconnect
cables before removing the battery pack.
Reduce audio level before using the earpiece.
Batteries should be disposed of in accordance with your company's work practice, and/
or any relevant laws or guidelines in your country.
This instrument, or family of instruments, will not be permanently damaged by
reasonable electrostatic discharge and has been tested in accordance with IEC 801-2.
However, in extreme cases temporary malfunction may occur. If this happens, switch off,
wait and switch on again. If the instrument still malfunctions, disconnect the batteries for