Before Starting Adjustment - Sony HVR-M25J Service Manual

1.

Before starting adjustment

Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
(Machine before starting repair)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
(The same model of the same destination)
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-2 for the items to be checked)
HVR-M25J/M25U/M25N/M25E/M25P/M25C
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Save the EVR data
to a personal computer.
(Former board)
(Machine to be repaired)
Save the data.
SECTION 6
ADJUSTMENTS
PC
Remove the EEPROM and install it.
PC
6-1
PC
(Machine after a board is replaced)
Download the saved
data to a machine.
(New board)
(Machine to be repaired)
Download the data.