Car Seat Parts; How To Adjust The Shoulder Belts - Snapkis Transformers 0-4 User Manual

4. Car Seat Parts

Headrest
Shoulder pad
Inner cushion
Buckle pad
Quick adjuster button
Harness adjuster strap
Blue belt hook
Red Lock-o
Belt route slot
for Group I
Belt route slot for
Group 0+
5
Backrest
5-point
harness
system
Belt route slot for
Group I
Belt route slot for
Group 0+
Reclining
adjustment lever
Shoulder belt
route slot
Shoulder belt
Yoke connect plate
Manual storage
Car seat base
5. How to ensure the shoulder belts are at the
correct height
A
B
C

6. How to adjust the shoulder belts

If the height of the shoulder belt is not suitable for your child, adjust it according
to the following steps:
Step 1: From the back of the
car seat, remove both
shoulder belts from the
yoke connect plate.
For your child's safety, always check
that the height of the shoulder belts
are adjusted according to the
size/height of your child. The
shoulder belt should be at the same
level as your child's shoulder or
slightly higher(as shown in the
diagram).
Step 2: Pull both
Step 3: Insert the
shoulder belts out
shoulder belts into
from the shoulder
the appropriate
belt route slot.
shoulder belt route
slot.
Step 4: Fit the shoulder belts into
the yoke connect plate.
Important: Make sure both
shoulder belts are of the same
height, not twisted, and fitted
properly into the yoke connect
plate.
6