Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Snapkis Steps 1-11
Summary of Contents for Snapkis Steps 1-11
- Page 1 Steps 1-11 USER MANUAL Group I,II,III Suitable from 9kg to 36kg (approx. 9 mths to 12 yrs) 601 Sims Drive, Pan-I Complex 88018 Singapore 387382 Approved to ECE R44-04 standard www.snapkis.com (Please read this instruction manual carefully before installation)
-
Page 2: Table Of Contents
2. Notice Contents 1. This is a “Universal” child restraint. It is approved to ECE R44-04, for general 1. Application of Car Seat use in vehicles and it will fit most, but not all vehicles. 2. Understanding Your Vehicle 2. A correct fit is likely if the vehicle is capable of accepting a “Universal child restraint for this age group. -
Page 3: Safety Information
3. Safety Information 13) Please keep the child car seat in a safe place when not in use. Do not place WARNING heavy objects on the car seat. 14) Please follow the installation instructions closely. Do not allow the car seat to For your child’s safety, please read this be jammed in the vehicle door, seat runners, etc. -
Page 4: Car Seat Parts
4. Car Seat Parts 5. How to ensure the shoulder belts are at the correct height For your child’s safety, always check Headrest that the height of the shoulder belts are adjusted according to the Small head size/height of your child. The 5-point harness cushion shoulder belt should be at the same... -
Page 5: How To Fasten The Harness Buckle
7. How to fasten the harness buckle Tightening the harness Place your child in the car seat. Insert the joined buckles tongues into the harness buckle. Adjust the position of the lap and shoulder belts. Pull the harness adjuster strap until the harness is tight. click Step 3 Step 2... -
Page 6: How To Install Car Seat For Group I (9-18Kg)
10. How to install car seat for Group I (9-18kg, approx. 9mths to 4 years) Step 5: Pass the vehicle seat belt through the seat belt perforation to the back of the car seat. Pass the seat belt through the seat belt perforation on the other side to the front of the car seat. -
Page 7: How To Install Car Seat For Group Ii (15-25Kg)
11. How to install car seat for Group II (15-25kg, approx. 3 to 7 years) Removing the 5-point harness system Step 3: Pass the vehicle shoulder Step 2: Place your child on the car belt through the seat belt route seat. -
Page 8: How To Install Car Seat For Group Ii,Iii (15-36Kg)
12. How to install car seat for Group II, III (15-36kg, approx. 4 to 7 years) click Step 6: Place the vehicle seat belt over your Step 7: Fasten the seat belt into child. It should go through the lap belt route the buckle properly until you hear slot under the armrest on the other side of a “click”... -
Page 9: How To Remove The Car Seat Cover
14. How to remove the car seat cover Step 7: Turn the car seat to the back, Step 8: Remove the car seat cover. Step 2: Turn the car seat to the Step 1: Remove the inner headrest. Press unfasten the buttons on the car seat back, remove both shoulder belts the red button on the harness buckle to cover. - Page 10 Do not remove or make any additions to the car seat cover and 5-point harness system. Flat dry. Avoid drying the seat cover in direct sunlight. Do not dry clean. Machine/ Do not Do not bleach Do not wring Do not iron Hand wash, tumble below 30˚C...
Need help?
Do you have a question about the Steps 1-11 and is the answer not in the manual?
Questions and answers