Mains In; External Dc Input; Balanced Analogue Outputs 2; Unbalanced Analogue Outputs 2 - Glensound ADDA 1 User Manual

REAR PANEL
6. AC Mains
7. External DC
12. UNBALANCED
ANALOGUE IN
6.

Mains In

This AC input accepts a wide range power supply, suitable for use Worldwide. If used in
conjunction with the external DC supply then a seamless redundant power supply will be
provided.
7.

External DC Input

This DC input can be used instead or as well as the mains input. It requires a +/- 12V power
source (such as our PS1). If used in conjunction with the mains input it will seamlessly provide
a redundant power source.
8.

Balanced Analogue Outputs 2

One pair of balanced stereo Neutrik XLRs providing the audio outputs of the DAC so the
digital input is the audio source. The outputs are electronically balanced with wide band low
noise circuitry. These outputs have the same source as the unbalanced analogue audio
outputs. The output level in relationship to digital full scale can be set in the settings.
9.

Unbalanced Analogue Outputs 2

One pair of unbalanced stereo RCA (Phono) connectors providing the audio outputs of the
DAC so the digital input is the audio source. The outputs are electronically balanced with
wide band low noise circuitry. These outputs have the same source as the balanced analogue
audio outputs. The output level in relationship to digital full scale can be set in the settings.
8. BALANCED
ANALOGUE OUT
9. UNBALANCED
ANALOGUE OUT
13. BALANCED
ANALOGUE IN
14. DIGITAL OUT
10. WORD CLOCK
SYNC INPUT
11. AES3 SYNC
15. DIGITAL IN
Page 17 of 27
INPUT