Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Days ANI-RC440
Summary of Contents for Days ANI-RC440
- Page 1 ANI-RC440 – 440mm ANI-RC490 – 490mm Tilt ‘n’ Space Wheelchair...
-
Page 2: Table Of Contents
Days Tilt ‘n’ Space Wheelchair User Guide Contents 1. Introduction ..............................4 2. Important safety instructions .......................... 4 2.1 General safety instructions ........................4 2.2 Brakes ................................ 4 2.3 Anti-tilt device ............................5 2.4 Tyres ................................5 2.5 Obstacles ..............................5 2.6 Ascents and descents .......................... - Page 3 Days Tilt ‘n’ Space Wheelchair User Guide 4.16 Side shoulder pads ..........................14 4.17 Anti-tilt device ............................14 4.18 Tilting aid ............................... 14 4.19 Head rest ............................... 15 4.20 Therapy table (optional) ........................15 4.21 Lap belt (optional) ..........................15 5.
-
Page 4: Introduction
Days Tilt ‘n’ Space wheelchair to the user’s individual body size and comfort requirements. The Days Tilt ‘n’ Space is designed for use inside and outside. -
Page 5: Anti-Tilt Device
Days Tilt ‘n’ Space Wheelchair User Guide The drum brake is designed exclusively for operation by an assistant pushing the wheelchair. Drum brake can be used as a parking brake and also for slowing down the wheelchair gently. 2.3 Anti-tilt device The anti-tilt device prevents the wheelchair from tipping over backwards. -
Page 6: Contraindications
3.1 Checking the delivery The Days Tilt ‘n’ Space wheelchair is supplied fully assembled in a carton though requires setting up prior to use: see 4.1. After unpacking the wheelchair, keep the carton if at all possible. It can be used for subsequent storage or return of the wheelchair. -
Page 7: Package
Days Tilt ‘n’ Space Wheelchair User Guide 3.2 Package The Package contains the following main components: a) Wheelchair, preassembled b) 1 pair of leg rests (adjustable angle) c) 1 head rest d) 1 pair of side sections with arm rests... -
Page 8: Using The Wheelchair
First fold the foot plates up or remove the leg rests completely. Move the Days Tilt ‘n’ Space as close as possible to the present or future seat until they are front to front. If you wish to move from another wheelchair or room chair, lock it by setting the parking brakes. -
Page 9: Negotiating Steps Or High Curbs
Days Tilt ‘n’ Space Wheelchair User Guide 4.5 Negotiating steps or high curbs Two assistants are required for high steps or staircases with more than three steps. The assistant must hold fixed frame parts only (see figures). When negotiating a step the assistant at the back pulls the wheelchair over it by pulling the fixed handles. -
Page 10: Leg Rests
Days Tilt ‘n’ Space Wheelchair User Guide 4.7 Leg rests To make it as easy as possible to enter and leave your wheelchair, the front plates can be folded up or the leg rests can be swung to the side out of the way or removed. -
Page 11: Side Sections And Arm Rests
Days Tilt ‘n’ Space Wheelchair User Guide 4.8 Side sections and arm rests The height of the side sections with the arm rests is adjustable Loosen the hand wheel and remove side section completely out of the guide ... -
Page 12: Seat Angle
4.13 Parking brake The Days Tilt ‘n’ Space is fitted with a tyre brake that can be operated by the user. This must be used as a parking brake only. It is not suitable for use as a brake for stopping or slowing the wheelchair! This is done with the hand rims by the exercise of light pressure with the flat of the hands. -
Page 13: Drum Brake
Make sure that the brake locks completely when the lever is set and does not snap back. 4.14 Drum brake Days Tilt ‘n’ Space is fitted with drum brake, which can only be operated by an assistant with the brake levers mounted on the handles. ... -
Page 14: Side Shoulder Pads
Days Tilt ‘n’ Space Wheelchair User Guide 4.16 Side shoulder pads The height, width and angle of the side pads of the Days Tilt ‘n’ Space can be adjusted Loosen hexagon socket screws (SW5) at the side support holders ... -
Page 15: Head Rest
A lap belt is an optional extra for securing users who cannot otherwise be securely held in the wheelchair. The Days Tilt ‘n’ Space can be fitted with a safety belt attached to the back frame member. The belt is opened and closed with the locking strap. -
Page 16: Technical Data
Days Tilt ‘n’ Space Wheelchair User Guide 5. Technical data Dimensions and weights Max. Load capacity (kg): Seat width (cm): 44 / 49 Seat depth (cm): 42 - 48 Seat height (cm): Seat angle (°): 0 to 15 Overall width (cm):... -
Page 17: Care Instructions For The User
8. Disposal If your Days Tilt ‘n’ Space is no longer used and you wish to dispose of it, please contact your dealer. If you wish to dispose of it yourself, please contact a local recycling company for the disposal regulations of your jurisdiction. -
Page 18: Transfer Of The Wheelchair
11. Warranty Warranty claims can be made for all defect of the product that can be confirmed as due to material or manufacturing faults. Our manually operated Days Tilt ‘n’ Space wheelchair is supplied with a warranty of 1 year.
Need help?
Do you have a question about the ANI-RC440 and is the answer not in the manual?
Questions and answers