ChargingTheShaver; UsingTheShaver - Panasonic ES-RC40 Operating Instructions Manual

Charge

Chargingtheshaver

Perform the following steps to charge the shaver if it
seems to lose the speed.
1
1
Turnofftheshaverandinsertit
intheACadaptoruntilitclicks
asillustrated.
2
2
Plugintheadaptorintoa
householdoutlet.
The charge indicator lamp glows red.
•
Charging is completed after approx.  hours.
•
The charge indicator lamp glows and stays on until
the adaptor is disconnected from a household outlet.
•
Recommended ambient temperature for charging is
0‑40 °C. The battery may not charge under extreme
low or high temperatures.
•
When charging the shaver for the first time or when it
has not been in use for more than  months, the
charge indicator lamp may not glow. It will eventually
glow if kept connected.
10
ES-RC40-30_CH.indb 10
Shave

Usingtheshaver

1
1
Slidethepower
switchupwards.
•
The switch on lamp
ES‑RC40
glows blue.
•
Adequate ambient temperature for using is 0‑40 °C. If
you use the appliance in temperature outside of the
recommended range, it may stop functioning.
Start out shaving by applying gentle pressure to your
face. Stretch your skin with your free hand and move
the shaver back and forth in the direction of your
beard. You may gently increase the amount of
pressure as your skin becomes accustomed to this
shaver. Applying excessive pressure does not provide
a closer shave.
2
2
Holdtheshaveras
illustratedabove
andshave.
2010/09/27 17:46:57