LEVER (PINCH) ASSY
3 polyethylene washer
1 Fit shaft on the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
HOUSING
2 Install the hanger on to
two claws of the housing.
4 Fit claw on B part.
3 Put the housing
under A part.
A part
2 claw
hole
5 Fit projections on C part.
C part
B part
– 21 –
6 polyethylene washer
B
5 claw
shaft
4 Fit shaft on the lever (pinch) assy in
hole on the chassis (M) assy and
install the lever (pinch) assy.
C
shaft
C
7 Install the spring (pinch press) to
B
7 Holder the hanger by bending the claw.
1 Install the catch to the hanger.
hanger
6 Fit projection on D part.
8 Holder the hanger by
bending the claw.
hole
shaft A
shaft A .
Set the ends of spring to B and C .
D part