Hitachi CP-X205W(C14-20N) Service Manual page 52

When assembling
a. Tighten 7 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp
door separated.
In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing
down the upper case in the direction of the arrow. Be careful not to bend the outside casing.(Torque:0.39-
0.59N•m)
b. Attach the Lamp door.
CP-X205W (C14-20N) / CP-X305W (C14-25N)
These are not screw holes. Do NOT insert a
screw or screwdriver into them to avoid damag-
ing the inside.
Lamp door
CAUTION
Tighten this screw using a manual screwdriver.
52
CAUTION