5.1 Re-configuration
5.1.1- Sub-menu Xover (crossover)
menu Xover (crossover)
the Sub-menu XOVER. This sub
control, and the stereo connection.
control, and the stereo connection.
certain memory position. There are 10 positions available. The name of each
certain memory position. There are 10 positions available. The name of each
certain memory position. There are 10 positions available. The name of each
memory position can have up to 16 characters.
memory position can have up to 16 characters.
2-Sub-menu SECURITY
Push the "Menu" button and then BACK/
Push the "Menu" button and then BACK/NEXT and ENTER to access the Sub
menu SECURITY. This sub-menu includes functions to block the access to other
menu SECURITY. This sub
functions in the processor.
functions in the processor.
There are 4 security levels:
There are 4 security levels:
CHANGE ONLY, where the parameters can be accessed, but not be changed.
CHANGE ONLY, where the parameters can be accessed, but not be changed.
CHANGE ONLY, where the parameters can be accessed, but not be changed.
The MUTE buttons a
The MUTE buttons are operational.
CHANGE+VIEW, where the parameters cannot be accessed nor changed. The
CHANGE+VIEW, where the parameters cannot be accessed nor changed. The
CHANGE+VIEW, where the parameters cannot be accessed nor changed. The
MUTE buttons are operational.
MUTE buttons are operational.
CHANGES+MUTES, where the parameters can be accessed but not changed.
CHANGES+MUTES, where the parameters can be accessed but not changed.
CHANGES+MUTES, where the parameters can be accessed but not changed.
The MUTE buttons are not operational.
The MUTE buttons are not operational.
EVERYTHING, where the parameters
EVERYTHING, where the parameters cannot be accessed, cannot be changed,
and the MUTE buttons are not operational.
and the MUTE buttons are not operational.
A) After the security level is selected, press ENTER.
A) After the security level is selected, press ENTER.
Use the buttons BACK and NEXT to move the cursor and turn the parameters
Use the buttons BACK and NEXT to move the cursor and turn the parameters
Use the buttons BACK and NEXT to move the cursor and turn the parameters
button to select the character. Once the password is correct, press ENTER.
button to select the character. Once the passw
A) Push the button "Menu" and then BACK/NEXT and ENTER to access
A) Push the button "Menu" and then BACK/NEXT and ENTER to access
A) Push the button "Menu" and then BACK/NEXT and ENTER to access
XOVER. This sub-menu includes the following commands:
B) LOAD A XOVER: loads a crossover stored in the memory.
B) LOAD A XOVER: loads a crossover stored in the memory.
B) LOAD A XOVER: loads a crossover stored in the memory.
C) DESIGN A XOVER: configures the type of crossover, the input channel
C) DESIGN A XOVER: configures the type of crossover, the input channel
C) DESIGN A XOVER: configures the type of crossover, the input channel
D) STORE A XOVER: memorizes all the adjustments of a crossover in a
D) STORE A XOVER: memorizes all the
E) ERASE A XOVER: erases a memory position.
E) ERASE A XOVER: erases a memory position.
menu includes the following commands:
NEXT and ENTER to access the Sub-
menu includes functions to block the access to other
cannot be accessed, cannot be changed,
ord is correct, press ENTER.
adjustments of a crossover in a
7
Need help?
Do you have a question about the DT 2006S and is the answer not in the manual?