4.1 Front Panel
1. LCD PANEL: displays the menu and the parameters configured in the equipment
LCD PANEL: displays the menu and the parameters configured in the equipment
LCD PANEL: displays the menu and the parameters configured in the equipment
2. BACK/NEXT: used to scroll through the menus
BACK/NEXT: used to scroll through the menus
3. MENU: provides access to the equipment's configurations, limiters, crossovers, etc.
MENU: provides access to the equipment's configurations, limiters, crossovers, etc.
MENU: provides access to the equipment's configurations, limiters, crossovers, etc.
4. GAIN: gain adjustment button
GAIN: gain adjustment button
5. QUIT: button to leave the menu
QUIT: button to leave the menu
6. ENTER: confirmation button
ENTER: confirmation button
7. PARAMETER: button to adjust and change
PARAMETER: button to adjust and change the parameters
8. INPUT/OUTPUT LED: LED indicator of input and output signal
INPUT/OUTPUT LED: LED indicator of input and output signal
9. MUTE: button to mute the outputs
MUTE: button to mute the outputs
10. POWER: on/off button
4.2 Rear Panel
Figure
1. EXTRA FUSE
2. POWER PLUG, AUTOMATIC Voltage Selector
POWER PLUG, AUTOMATIC Voltage Selector
3. PC LINK CONNECTOR
4. SIGNAL OUTPUTS
XLR cable connection used
From 1 to 6:
Figure 1
used
5
Need help?
Do you have a question about the DT 2006S and is the answer not in the manual?