Main Part Inspection Method - Samsung TH026EAV Service Manual

12-4 Main Part Inspection Method

Part
Room Temperature Sensor
Room Fan Motor
Stepping Motor
12-22
24867A(1)_TH026EAV_1.indd 22
Breakdown Inspection Method
Measure resistance with a tester
Normal At the normal temperature 37kΩ~ 8.3kΩ(-7˚C~+30˚C)
Abnormal ∞, 0Ω . . . Open or Short
Measure the resistance between terminals of the connector (CN72) with a tester.
Normal At the normal temperature (10˚C ~ 30˚C)
Compare terminal
Yellow, Blue
Yellow, Red
Abnormal ∞, 0Ω . . . Open or Short
Measure the resistance between the red wire and each terminal wire with a tester.
Normal About 300Ω at the normal temperature (20˚C ~ 30˚C)
Abnormal ∞, 0Ω . . . Open or Short
*Refer to Table 12-3-4.
Resistance Remark
404.4Ω ± 10% Main
Sub
340Ω ± 10%
Samsung Electronics
2006-04-03 ｿﾀﾀ・9:49:26