Electrolux WT GL3 Vi 200 User Manual page 13

This is the maximum level for the quantity of liquid additives.
Always obey the instructions that you find on the packaging of the detergent products.
SETTING THE PROGRAMME (KNOB 1 )
Turn the programme selector dial to the re-
quired programme.
The programme dial determines the type of
washing cycle (e.g. water level, drum move-
ment, number of rinses) and the washing
temperature according to the type of laun-
dry.
The pilot light of button 8 starts blinking.
The programme dial can be turned either
clockwise or anticlockwise.
= Reset programme / switching OFF of
the machine
If you turn the programme dial to an-
other programme when the appliance
is working, the yellow pilot light of but-
ton 8 blinks 3 times. The display shows
the message Err to indicate a wrong
selection. The machine will not perform
the new set programme.
SETTING THE SPIN SPEED (BUTTON 2)
When you set the programme, the appli-
ance automatically proposes the maximum
spin speed allowed by that programme.
Press this button repeatedly to change the
spin speed. The relevant light will light up.
RINSE HOLD : the water of the last rinse is
not emptied out to prevent the fabrics from
creasing. When the programme has finish-
ed the display shows a blinking
The DOOR pilot light goes on.
The pilot light of button 8 is off. The door is
blocked to indicate that the water must be
emptied out.
To empty the water out please read
chapter «At the end of the programme».
SETTING THE STAIN OPTION (BUTTON
3)
Set this option to treat heavily soiled or
stained laundry with stain remover
The appliance extends the main wash
phase and intensifies the stain action
phase. The relevant light illuminates.
This option is not available with a tem-
perature lower than 40°C.
If you wish to perform a programme with
the stain option, pour stain remover into
compartment
SETTING THE TIME SAVING OPTION
(BUTTON 4)
This option allows you to modify the wash-
ing time, automatically proposed by the ap-
pliance.
Press button 4
once
DAILY
Press button 4 twice
SUPER
QUICK
The display shows the decreased washing
time.
SETTING THE EXTRA RINSE OPTION
(BUTTON 5)
This appliance is designed for saving water.
However, for people with a very delicate
skin (allergic to detergents) it may be nec-
essary to rinse the laundry using an extra
quantity of water (extra rinse).
.
The appliance will perform some additional
rinses.
STARTING THE PROGRAMME
(BUTTON 8)
Press the button 8 to start the programme.
The corresponding red pilot light stops
blinking.
The pilot light A is on to indicate that the
appliance starts operating.
The pilot light C is on to indicate the door is
locked.
Press the button 8 to interrupt a pro-
gramme which is running. The correspond-
ing red pilot light starts blinking.
.
The relative pilot light comes on.
The washing duration will be re-
duced to wash daily soiled laundry.
The relative pilot light remains lit.
The washing duration will be re-
duced to wash lightly soiled laun-
dry or items used or worn for a
short time.
electrolux 13