Advertisement
Table of Contents
- 1 Table of Contents
- 2 Important Statement
- 3 Safety Precautions
- 4 Safe Notice for Drone Battery
- 5 Charging Instruction for Drone Battery
- 6 Checklist before Flight
- 7 Instruction for Drone and Transmitter
- 8 Pre-Flight Operation Instruction
- 9 Functions Introduction
- 10 Spare Parts Installation Instruction
- 11 To Know Your APP
- 12 Spare Parts
- 13 Troubleshooting Guide
- Download this manual
Advertisement
Table of Contents
Related Manuals for Udirc U42W
Summary of Contents for Udirc U42W
- Page 1 Heading Hold High / Low Speed Mode Low Battery Alarm 360° Flips Altitude Hold Mode One Button Take Off / Landing U42W User Manual...
-
Page 2: Table Of Contents
Catalog Important Statement Safety Precautions Safe Notice for Drone Battery Charging Instruction for Drone Battery Checklist before Flight Instruction for Drone and Transmitter Pre-flight Operation Instruction Functions Introduction Spare Parts Installation Instruction To know your APP Spare Parts Troubleshooting Guide... -
Page 3: Important Statement
1. Important Statement Thank you for buying UDIRC's product. People who under 14 years old must not use the product. Please read this brochure carefully before using the product. You are regarded as accepting all content in this user manual when using this drone. -
Page 4: Safe Notice For Drone Battery
(4) Keep away from humid environment The drone inside is consisted of precise electronic components. Humidity or water vapor may damage electronic components and cause accident. (5) Safe operation Please operate the RC drone in accordance with your physical status and flying skill. -
Page 5: Charging Instruction For Drone Battery
4. Charging Instruction for Drone Battery 1. Connect the drone battery with USB cable first and then choose one of the method as below picture shown to connect with USB plug. 2. The red USB indicator light keeps bright when charging. And the light turns green when fully charged. -
Page 6: Instruction For Drone And Transmitter
6. Instruction for Drone and Transmitter 6.1 Drone Front A Propeller B Propeller Clockwise Counterclockwise Left Right B Propeller A Propeller Counterclockwise Clockwise Rear Specification Charging Time for Drone Battery 60~80 mins Drone Size 361*355*107mm Max Flying Distance/Radius 100m Drone Weight 130g 146mm Max Image Transmission Distance/Radius 40 m... - Page 7 Exploded View Name Name A Propeller (Clockwise) Landing Gear Clockwise Motor (Red and Blue Wire) Rear Lamp Cover (Orange) Drive Shaft Lower Cover Motor Gear Front Lamp Cover (Green) Motor Holder WiFi Camera Drive Gear Battery Cover B Propeller (Counterclockwise) Receiving Board Counterclockwise Motor (Black and White Wire) Main Casing...
- Page 8 6.2Transmitter Mobile Phone Screen Lens Hood Power Indicator Light Mobile Phone Holder Forward / Backward Trimmer Power Switch Right Stick (Forward / Left Stick Backward / Left / Right) (Throttle / Rudder) Left / Right Flying Left / Right Trimmer Rudder Trimmer Take Off / Landing / Emergency Stop Button...
-
Page 9: Pre-Flight Operation Instruction
Battery installation: Open the battery cover on the back side of the transmitter and put 4 alkaline batteries (AA, not included) into the box in accordance with electrode instructions, as Picture shown. Drive the screw according to the arrow direction to loosen the screw to open the battery cover. - Page 10 Important Notice: Please make sure the drone is placed on the horizontal position after powering on the drone, so that the drone can work well. Picture 4 Picture 5 Picture 6 7.2 Checking (1). The camera is the drone front. Keep the drone front away from you. (2).
- Page 11 (4). Do not move the Left Stick before successful calibration. Push the Right Stick as Picture 10 and then release. The drone body lights flash, which indicates that the drone is calibrating. When the drone body lights remain solid, which indicates successful calibration.
-
Page 12: Functions Introduction
8. Functions Introduction Two Take Off Methods (1). Method 1 (Take off): Push the Left Stick and Right Stick as Picture 7 shown to start the motor and then release. Then push up the Left Stick to fly up the drone to certain altitude and then release the stick. - Page 13 Flip Mode Press the Flip Mode button when the drone is flying, and you will hear constantly beep, which indicates flip mode is ready. Push the Right Stick to forward / backward / left / right to utmost and then release the stick.
-
Page 14: Spare Parts Installation Instruction
Low Battery Alarm When the transmitter in low battery, the transmitter will beep to remind the user to land the drone to replace the batteries as soon as possible. Or the drone may out of control. When the drone in low battery, the transmitter will beep constantly to remind the user to land the drone as soon as possible. -
Page 15: To Know Your App
(2). Enter “Settings” of the mobile phone, turn on WiFi (WLAN) and choose udirc-***, return to desktop after successful connection. (3). Click on the icon Flyingsee and click on to enter remote control... - Page 16 HOME Explore UDIRC Drone EMERGENCY Learn the operation of drone Flyingsee Remote control interface Help Media 100% Click on the icon Home Page Real time Transmission Interface (4). Click on to enter Virtual Control Interface. At this time the drone LED lights change from flash to solid bright, which indicates successful frequency pairing and the drone is ready to be controlled via APP.
- Page 17 Flight Route Setting Mode Click on this icon and it turns red. Draw a flight route in the right area. The drone will fly according to the flight route. Click on the icon again to exit from Flight Route Setting Mode. The icon turns white. Emergency Stop EMERGENCY The icon is red by default.
- Page 18 If the mobile phone shakes to forward / backward, the Right Ball will roll forward / backward, causing the drone to fly forward / backward. Video Click on this icon to record video. The recording time will show at the bottom of the screen.
- Page 19 10.5 APP Flying Control To Take Off EMERGENCY Click on One Button Take Off icon to start the drone. The drone will fly up automatically and stay flying at a altitude of 1.2 meters. 00:00 If the drone tilts forward or backward Click the “-”...
- Page 20 10.6 Media FLYINGSEE 1.0 To view the photos and videos. Home Explore UDIRC Drone Learning Drone Remote control interface My Gallery Help My Gallery Internal Memory News Notice Main Menu Media Interface Tip: Only when authorizing the APP to read your mobile phone media data, or you maybe unable to view the aerial photography.
-
Page 21: Spare Parts
11. Spare Parts For convenience, the spare parts are listed for you to choose, which can be purchased from the local seller. U42W-01 U42W-02 U42W-03 U42W-04 Upper Cover Lower Cover Propeller Propeller Guard U42W-05 U42W-06 U42W-07 U42W-08 Landing Gear Main Casing... -
Page 22: Troubleshooting Guide
Troubleshooting Guide Problem Problem Cause Solution 1. Low battery. 1. Replace the transmitter battery. 2. The battery positive pole and negative 2. Install the battery in accordance with the transmitter pole are in reverse order. user manual. indicator light is off 3. - Page 23 FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide residential protection against harmful interference in a residential installation.