Temperature Selection; Defrosting Your Appliance; Door Reversal Instructions; Operating Instructions - Danby DCR016A3BBUD5 Owner's Use And Care Manual

Operating Instructions

TEMPERATURE SELECTION

To turn the control to the OFF position, rotate the control knob to "0". Min is the warmest
setting where max is the coolest setting. Changes in ambient room temperature will affect
internal refrigerator temperatures (choose the correct setting on the thermostat knob).

DEFROSTING YOUR APPLIANCE

This refrigerator is equipped with a "Push Button" (semi-automatic) defrost system. To activate the defrost cycle, simply
push (in) the red defrost button located on the centre of the knob/dial (do not turn the control knob/dial to the zero/off
position). The defrost cycle is initiated immediately. When defrosting is complete, the "Push Button" will release (pop-out)
automatically and resume normal operating conditions at the same temperature setting.
Note: If the "Push Button" is activated (pushed in) accidentally, it will not be possible to "manually" pull out the push but-
ton (deactivate the defrost cycle). You must let the defrost cycle run its course.
Defrosting of your refrigerator should take place whenever ice build-up inside the freezer compartment reaches 1/4" (3-5
mm) thick.
Note: Never use sharp or pointed instruments to remove ice from the freezer compartment. Do not allow the refrigera-
tor to continue operation if the freezer compartment is pierced.
When the refrigerator is not to be used for a long period of time, disconnect the appliance from the electrical supply and
leave the door partially open. This will help reduce mold and mildew build-up.

DOOR REVERSAL INSTRUCTIONS

If you fi nd the direction of opening the door on your appliance inconvenient, you can change it by following the steps
shown in the diagrams.
To avoid personal injury to yourself and/or property, we recom-
mend someone assist you during the door reversal process.
CAUTION
3
Max
Min
Fig. A