Control functions
1. Throttle lever
ESU10333
Throttle override system
(T.O.R.S.)
EWS00041
WARNING
If the T.O.R.S. is activated, make sure that
the cause of the malfunction has been cor-
rected and that the engine can be operated
without a problem before restarting the
engine. Continuing to operate with a mal-
function could cause loss of control or
damage.
If the throttle valves or throttle cable malfunc-
tions during operation, the T.O.R.S. will be ac-
tivated when the throttle lever is released.
The T.O.R.S. is designed to override the igni-
tion and limit the engine speed to less than the
clutch engagement speed if the throttle valves
fail to return to the idle position when the throt-
tle lever is released. (See page 75 for the
clutch engagement speed.)
Idling
Throttle
Released
lever
Throttle
Closed
valve
Engine
T.O.R.S.
runs
properly.
10
Malfunc-
Riding
tion
Squeezed
Released
Open
Open
Engine
T.O.R.S.
runs
will be ac-
properly.
tivated.
TIP
If the T.O.R.S. is activated, the warning light
and self-diagnosis warning indicator will flash,
and the two-digit code "84" will flash in the
meter display. If this occurs, have a Yamaha
dealer check the system as soon as possible.
1. Warning light "
2. Self-diagnosis warning indicator "
3. Two-digit code "84"
ESU10355
Multi-function meter unit
The multi-function meter unit is equipped with
the following:
a digital speedometer
G
a tachometer
G
an odometer
G
a tripmeter (which shows the distance trav-
G
eled since it was last set to zero)
warning indicators (which show self-diag-
G
nosis, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
G
low coolant temperature conditions)
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer level or the thumb
warmer level)
"
"