Hisense HR6FDFF701SW User's Operation Manual page 7

7
hinges with a Wrench (8mm) and 1 ground
screws (F) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges (G).
4. Use your both hands to open the door
more than 90 . Lift it up and take it off.
°
5. Remove the 4 hex head bolts hinges (I)
with an Allen wrench (5 mm).Remove the
lower left and right door hinges (J).
Re-attaching the fridge doors
To reattach the fridge doors after you have
moved the appliance to its final location,
assemble the parts in reverse order.
1. To prevent water leaks, the water line
should be fully inserted into the center of
the coupler. The guide lines should be
coincided exactly with the head of the
movable part.
2. Make sure the clips are properly
connected to the coupler.
Caution!
In case the fridge doors can't be
self-closed, please make sure the door
opened more than 90
or re-attaching the fridge doors.
Disassembling My Fresh Choice door
1. Take out My Fresh Choice drawer (A) in
the direction of the arrow.
2. Remove the 2 screws (B) holding the
wire nails with a Philips screwdriver (+).
3. Take off the wire nails (C). To remove
the wire connector, press the top of the
connector (D) and separate it from the
other one.
w hen you remove
°