Software Update For Panel/T-Con Replacement - Sony KD-65X8000C Service Manual

Software update for Panel/T-CON replacement

Panel/T-CON replacement
After AC Plug-in, wait for 30sec
then turn on TV by power key on
TV or remote commander.
Check condition
Is it the Case 1 or 2?
Update to the latest software
version
*Remove all signal connection.
(antenna, external input, ether
cable, etc)
*Insert the USB memory.
SMART CORE LED will
change to white blinking. *After
completes, TV will reboot by
itself and turns on.
*Disconnect the USB memory.
KD-65X8000C(CH)
<Case2>
Panel : Picture appear
SMART CORE LED : White Lit
<Case1>
Panel : No Picture
SMART CORE LED : Amber & Green blinking
or White Lit
Note1:
For a success of software writing,
it will take 20~30 min/time.
Note2:
Do not turn off TV while updating software.
If older software package version is used,
software cannot be update.
TV will reboot and turn on again.
No
Check the software
version by Service mode.
Is it latest version?
Yes
Model Number setting
Model Number setting
Update to the latest software
version
*Remove all signal connection.
(antenna, external input, ether
cable, etc)
*Insert the USB memory.
SMART CORE LED will
change to white blinking. *After
completes, TV will reboot by
itself and turns on.
*Disconnect the USB memory.
WB/Gamma, MURA, CUC data
transfer by Service mode
Reconfirm Software version and
Model name by Service mode
Turn off the TV by remote power
key then reboot the set (AC OFF
wait 10sec then AC plug-in), turn
on the TV by remote power key.
APPENDIX-1
95