Hitachi DZ-BD10H Quick Operation Manual page 5

Removing the BD/DVD
Pressing slightly on the center hub with a
finger, grip the edge of the disc with your
thumb and lift the disc out as shown.
When loading a new BD-RE/BD-R/DVD-RW
The disc must be formatted before it can be used for recording. When the disc is loaded, the
format confirmation screen will appear in the LCD monitor.
Open the LCD monitor.
Confirmation button
 
／
Select "YES" by pressing d, then press the confirmation button.
• When using a BD-RE/BD-R, formatting will start. Skip step
• When using a DVD-RW, proceed to step
(When using a DVD-RW)
The recording format selection screen appears.
Select "VR Mode" or "VF Mode" by pressing d/c, then press the
confirmation button.
VR Mode
After recording, you can perform
various editing functions, such as
choosing or deleting scenes. You
can play back the disc in a device
that supports an 8cm DVD-RW
(VR Mode) after finalizing the disc.
Note
Be careful that the power is not
accidentally cut off while formatting,
otherwise, the disc will become unusable.
.
VF (Video) Mode
Although editing cannot be done on
the camcorder, you can play back the
disc on other DVD devices after
finalizing the disc.
.
4