Running Kdm2000 On Red Hat Enterprise Linux 5 - Kanguru Defender 2000 User Manual

2.2.4 Running KDM2000 on Red Hat Enterprise Linux 5

Note: You must have Super User or Root privileges in order to run KDM2000 on Red Hat Enterprise
Linux 5.
To run KDM2000 from the Red Hat Enterprise Linux 5 operating system, connect your Defender 2000
to your computer through a USB port. A CD icon named 'KDM2000' will appear on the desktop. If the
KDM2000 window doesn't open automatically, double click on the KDM2000 icon to open it.
From the window that opens, copy the kdm2000_exec.sh shell script file to a location on your
computer's local hard drive.
Once the kdm2000_exec.sh shell script has been copied to a local hard drive, you can execute
KDM2000 through the Terminal:
1. Open the Terminal window by clicking on Applications → Accessories → Terminal. The Terminal
location may be different depending on which version of Red Hat you are running.
2. From the Terminal, navigate to the directory where you copied the kdm2000_exec.sh shell script
file to.
3. Type, "chmod 007 kdm2000_exec.sh" to allow full execute permission.
4. Type, "./kdm2000_exec.sh" to execute the shell script.
If it is your first time running KDM2000 you will need to complete the setup wizard in order to set your
security password (see section 2.3 The Setup Wizard on page 14). If you have already setup your
security password, you will be prompted to login (see section 2.4 Unlocking the Security Partition on
page 20).
Running KDM2000 on Red Hat Enterprise Linux 5
13