Using The Appliance; Understand The Air Quality Light; Switch On - Philips AC6606 User Manual

5
Put the pre-filter back into the
appliance.
Note
• Make sure that the side with the
two clips is pointing towards
you, and that all hooks of the
pre-filter are properly attached
to the purifier.
6
To reattach the side panel,
mount the panel onto the
bottom of the appliance first
(1). Then, gently push the
panel against the body of the
appliance (2).
7
Repeat the above steps and
assemble the air purification
filter for the other side of the
appliance.
26 EN
4 Using the
appliance
Understand the air
quality light
Color of the air
quality light
Blue
Blue-violet
Red-purple
Red
The air quality light automatically
goes on when the appliance is
switched on, and lights up all colors
in sequence.
In a short time the air quality
sensors select the color that
corresponds to the ambient air
quality.

Switch on

1
Put the plug of the appliance
into the wall socket.
» The appliance beeps.
» All lights go on once and
then go out again.
Air quality
level
Good
Fair
Unhealthy
Very
unhealthy