Streaming Multimedia Content To Your Tv - Huawei Y6 II User Manual

Wi-Fi Direct can only be used to transfer data between two Huawei devices. Check that both
devices support Wi-Fi Direct.
Connecting two devices using Wi-Fi Direct
Establish a Wi-Fi Direct connection to transfer data wirelessly between two devices.
1
Open Settings, select Wi-Fi and then turn on the Wi-Fi switch. Touch
2
Repeat the above steps on the other device and keep the Wi-Fi Direct search screen open on
both devices.
3
When your phone detects the other device, select it. Follow the onscreen instructions to
establish a Wi-Fi Direct connection between the two devices.
To terminate the Wi-Fi Direct connection, select
device you want to disconnect from and touch OK to disconnect.
Using Wi-Fi Direct to send and receive files
Share files between two devices by establishing a Wi-Fi Direct connection.
This feature requires a Wi-Fi connection. Ensure that Wi-Fi is enabled on both devices.
1
Open Gallery and select the picture you want to send.
2
Touch Share > Wi-Fi Direct. Wait until the receiving device is detected, then select it.
If the receiving device is not detected, check that Wi-Fi is enabled.
3
A prompt will be displayed on the receiving device. Touch Accept to accept the file transfer
request.
Open the notification panel and touch Notifications to monitor the file transfer progress.
By default, received files are saved to the Wi-Fi Direct folder on your phone's internal
storage.

Streaming multimedia content to your TV

Use MirrorShare to share multimedia content with friends and family. MirrorShare lets you
connect wirelessly to a TV or screen and display your photos, videos and games.
to open the Wi-Fi Direct screen. Select the
Accessing the Internet
Wi-Fi Direct.
85