After Each Use - Craftsman 580.754911 Operator's Manual

WARNING
• Keep at least 5 ft. (1.5 m) of clearance on all sides of
pressure washer including overhead.
similar laws.
same position as the original parts.
Clean and inspect the spark arrester as follows:
protector (B
D
B
A
2. Remove the two special screws (C) from the spark
E).
spark arrester screen. Be careful not to damage
the screen.
NOTICE
holes.
4. Install clean (or new) spark arrester in reverse
order of removal.

AFTER EACH USE

Water should not remain in the unit for long periods of
time. Sediments or minerals can deposit on pump parts
and "freeze" pump action. Follow these procedures
A
4. Coil high pressure hose on hose wrap provided on
E
C
D) from
21
trigger to relieve trapped pressure and let engine
cool.
WARNING The high pressure stream of water
amputation.
Storage
WARNING
WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN
TANK
Long Term