Subscribe to Our Youtube Channel
Related Manuals for Therapure TPP640S
Summary of Contents for Therapure TPP640S
- Page 1 ’ s guide TPP640S-083116 640S uv air purifier 640S uv air purifier...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INSTRUCTIONS Thank you for purchasing the Therapure ® IMPORTANT WARNINGS 640S air purifier. With UV light and UV Lamp Notice cleanable HEPA-type filtration to Mercury Notice clean the air, the Therapure ® 640S air UV Lamp Disposal Notice... -
Page 3: Safety Instructions
To reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed control devices. » The TPP640S and its remote is not a toy, do not allow Children to play with the air purifier or remote control. TPP640S... -
Page 4: Product Benefits
24 - hour timer for automatic power off. » Night mode to dim the control panel light when you sleep Control » Clean filter indicator. Panel » Remote Control. Quality Indicator Light Outlet Grill Remote Control Cleanable Pre Filter UV Lamp TPP640S... - Page 5 640S with a broken filter. Replace the filter if the filter has ® a tear or a hole in it. If the filter is damaged or needs replacement, please visit the Therapure ® website at www.envionproducts.com to order for a replacement filter. Or call 1.800.875.8577.
-
Page 6: Air Purifier Specifications
640S ® 640S CONTROLS/SETTINGS: WARNING: Power Control – To operate the Therapure ® 640S, press the Power button to turn on the The remote control has a coin cell battery. Keep the remote and the battery away from air purifier. -
Page 7: Cleaning & Maintenance
3. To clean the pre-filter, simply submerge in warm require more frequent cleaning. soapy water. Gently lift and submerge the NOTE: Always make sure the Therapure 640S is turned off and unplugged before cleaning. ® pre-filter several times until it is clean. -
Page 8: Replacing The Uv Lamp
Cleaning the Air Monitor: Figure 1 off and unplugged. Let the lamp cool down for 5 minutes before replacing it. The TPP640S is designed with an air monitor to Replacing the UV Lamp: track the quality of your air. Over time the monitor can become dirty and may require cleaning. -
Page 9: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY ONE YEAR LIMITED WARRANTY Your Therapure 640S air purifier is warranted to be free from defects in materials and ® workmanship for one year from the original purchase date. Should the product have a defect in materials or workmanship, we will repair or replace it without charge to you (a shipping and processing fee will apply). - Page 10 640S 640S TPP640S...
Need help?
Do you have a question about the TPP640S and is the answer not in the manual?
Questions and answers
I need a pre filter for model 640s
The compatible pre-filter for the Therapure model TPP640S is a cleanable pre-filter that can be removed from the air inlet grill and cleaned by submerging it in warm soapy water.
This answer is automatically generated
when i start my thera pure TPP640s starts off with blue light then 20 to 3o sec later to orange then to red and stays on continuously .
On the Therapure TPP640S, the lights indicate air quality as follows:
- Blue: Good air quality
- Orange: Fair air quality
- Red: Poor air quality
This answer is automatically generated
Unit will not turn on
The Therapure TPP640S unit may not turn on for the following reasons:
1. The power button has not been activated. Solution: Press the power button.
2. The unit is unplugged. Solution: Ensure the unit is properly plugged in.
3. The intake grille is not installed or locked in place. Solution: Check that the filter and intake grille are correctly installed and secured.
This answer is automatically generated
Replaced filter snd throughly cleaned unit
To properly maintain the Therapure TPP640S air purifier after replacing the filter and cleaning the unit, follow these steps:
1. Make sure the unit is turned off and unplugged.
2. Clean the filter using a vacuum along the filter’s intake and exhaust slots. Do not use water or cleaning products.
3. If the filter is not damaged, reinstall it in reverse order of removal.
4. Clean the intake grill with a vacuum or a slightly damp cloth.
5. Plug in the unit.
6. Press and hold the ON/OFF and UV/VOC buttons together for 3 seconds until the CLEAN FILTER indicator light turns off.
This completes the maintenance process.
This answer is automatically generated
Red indicstor light stays on constantly
The red indicator light on the Therapure TPP640S stays on constantly to indicate poor air quality.
This answer is automatically generated