Two Touch Memories; Character Table - Doro Comfort 3000 Manual

used, though the function and sound quality cannot be guaranteed. In the worst case, these could
damage the headset and phone. This type of damage is not covered by the telephone's
guarantee.
Selecting headset or handsfree mode
Select headset-/handsfree mode by setting the switch = /
Note! On delivery, the phone is set to handsfree mode. The handsfree function will not work when
the headset function is activated and vice versa.
Ringer
The ringer volume can be set using the switch on the back of the phone, melody and tone can be
set using the switches located under the battery cover.
Ringer volume
Ringer tone
Ring melody

Two touch memories

You can use the numerical keys 0 – 9 as two touch memories. Once a number has been stored
as two touch memory, you only need to press two keys to make a call.
Storing two touch memories
1. Press , until
Press and hold p until STORE NUMBER is displayed.
2.
Enter the phone number. Press p.
3.
Enter the name. Press p. STORAGE PLACE? is displayed.
4.
5. Select 0 – 9 by pressing the corresponding key. SAVED is displayed
Two touch dialling
1. Lift the handset.
Press M and select relevant memory location 0 – 9 .
2.
The phonebook will store 50 sets of names and phone numbers. Contacts in the phonebook are
arranged alphabetically. Each name can be up to 16 characters in length, and phone numbers
can be up to 22 digits in length.
If you subscribe to a Caller ID service, the name/number of the caller will be shown when you re-
ceive an incoming call (for those numbers stored in the phonebook or the memories).
Note! To access the phonebook features make sure that b is displayed. If
b.

Character table

Each number key has been allocated certain characters.
is displayed.
Phonebook
English
on the back of the phone.
4
is displayed, press