AC Tech SCF series Installation And Operation Manual page 33

NO. PARAMETER NAME
12 TB-13C FUNCTION
SELECT
13 TB-15 OUTPUT
14 CONTROL
15 SERIAL LINK
16 UNITS EDITING
17 ROTATION
19 ACCELERATION TIME
20 DECELERATION TIME
21 DC BRAKE TIME
22 DC BRAKE VOLTAGE
23 MINIMUM FREQUENCY
24 MAXIMUM FREQUENCY
25 CURRENT LIMIT
26 MOTOR OVERLOAD
NOTE 1: Factory defaults are shown for a 60 Hz base frequency. See Parameter 48 for 50 Hz base frequency.
NOTE 2: Maximum setting is 999.9 Hz on drives with High Output Frequency option. Consult the factory.
NOTE 3: If LINE VOLTAGE is set to LOW, maximum setting is 150%.
PARAMETER MENU (CONT'D)
RANGE OF ADUSTMENT
NONE (01), 0-10 VDC (02), 4-20 mA (03),
PRESET SPEED #3 (04), INCREASE FREQ (05),
EXTERNAL FAULT (06), REMOTE KEYPAD (07),
DB FAULT (08), ACCEL/DECEL #2 (09)
(SEE PARAMETER 6 - TB-14 OUTPUT)
TERMINAL STRIP ONLY (01),
REMOTE KEYPAD ONLY (02),
TERMINAL STRIP OR REMOTE KEYPAD (03)
DISABLE (01),
9600, 8, N, 2 WITH TIMER (02),
9600, 8, N, 2 WITHOUT TIMER (03),
9600, 8, E, 1 WITH TIMER (04),
9600, 8, E, 1 WITHOUT TIMER (05),
9600, 8, O, 1 WITH TIMER (06),
9600, 8, O, 1 WITHOUT TIMER (07)
TENTHS OF UNITS (01),
WHOLE UNITS (02)
FORWARD ONLY (01),
FORWARD AND REVERSE (02)
0.1 - 3600.0 SEC
0.1 - 3600.0 SEC
0.0 - 3600.0 SEC
0.0 - 30.0 %
0.0 - MAXIMUM FREQUENCY
MINIMUM FREQ - 240.0 Hz (NOTE 2)
30 - 180 % (NOTE 3)
30 - 100 %
30
FACTORY
DEFAULT
(NOTE 1)
NONE (01)
NONE (01)
TERMINAL STRIP
ONLY (01)
9600, 8, N, 2
WITH TIMER (02)
WHOLE
UNITS (02)
FORWARD
ONLY (01)
20.0 SEC
20.0 SEC
0.0 SEC
0.0 %
0.0 Hz
60.0 Hz
180%
100%