Ready Made RC RMRC Mako Assembly Instructions Manual page 2

Thank you for purchasing the RMRC Mako! It is important to read the manual in its entirety
before your maiden flight. This model is intended to be a short to medium range FPV aircraft.
The Mako is easy to operate with excellent flight characteristics, but we do not recommend a
flying wing as a beginner airframe for FPV unless they have assistance from an experienced
pilot. Please obey all current laws and use common sense for safety when operating.
Note: We reserve the right to modify information presented and cannot be held liable for errors
within.
Required to operate:
 Motor – 2212 2200KV (Included in PNP)
 Propeller – 6x4 E (Included in PNP)
 ESC – Hobby Wing 30A (Included in PNP)
 Servos – 2x 9g (Included in PNP)
 Batteries – 3s 2200-4200
Required for assembly:
 Epoxy or personal choice of glue
 Medium and Small Phillips screw driver
 Hobby Knife
 Servo Centering Tool
Page | 2