3. Disassembly and Reassembly
3-3 Replacement of High Voltage Transformer and HVC and Base bottom
Parts
Explanation Photo
High
voltage
capacitor
Base
Bottom
HV Trans
Explanation
1. Disconnect Oven Power.
2. Remove Panel Outer , Grill and Control Box.
3. Discharge The High Voltage Capacitor.
ATTENTION : When discharge must become ground
terminal of HVC and metal of around.
4. Remove screws(2) and take out the bracket.
5. Disconnect the Lead Wire.
6. Take out the Bracket of High Voltage Capacitor.
7.
Take out High Voltage Capacitor.
1. Disconnect the Lead Wire.
2. Remove Screw.(4)
3. Take out the HV Trans.
12
1. Remove Screw.(7)
2. Disconnect Lamp
Housing.
3. Remove Base bottom.