Replacement Of High Voltage Transformer And Hvc And Base Bottom - Samsung SMH9187W Service Manual

3. Disassembly and Reassembly

3-2 Replacement of High Voltage Transformer and HVC and Base bottom

Parts Explaination Photo
High
voltage
capacitor
Base
Bottom
HV Trans
Explaination
1. Disconnect Oven Power .
2. Remove Panel Outer .
3. Discharge The High Voltage Capacitor .
ATTENTION : When discharge must become ground
terminal of HVC and metal of around .
4. Remove screw .(1)
5. Disconnect the Lead Wire .
11
1. Remove
Screw .(5)
2. Disconnect
Lamp
Housing .
3. Remove Base
bottom .
1. Disconnect
Oven Power .
2. Remove the
Base bottom
and Panel
Outer .
3. Disassembly
the Bracket
Duct upper
after remove
screw .