[EasyLink Setup]
If this Home Theater System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the following
commands simultaneously:
Option
Description
[EasyLink]
Turns off or on all EasyLink
features.
To disable this feature, select
[Off] .
[One Touch
When you press PLAY , the
Play]
TV and Home Theater System
are turned on. Disc play starts
if there is a disc in the Home
Theater System.
To disable this feature, select
[Off] .
[One Touch
When you press and hold
Standby]
STANDBY , connected HDMI
CEC devices simultaneously
switch to standby.
To disable this feature, select
[Off] .
[System
When you play audio that is
Audio
routed from the connected
Control]
devices, this Home Theater
System switches to the
corresponding audio source
automatically.
To enable this feature, select
[On] . Then proceed to [Audio
Input Mapping] to scan and
map all the connected devices.
[Audio Input
When you map the audio
Mapping]
input correctly, this Home
Theater System switches to the
audio from the played device
automatically.
Note
•
You must turn on the HDMI CEC operations on the
TV/devices before you can enjoy the EasyLink controls.
See the TV/devices manual for details.
•
Philips does not guarantee 100% interoperability with
all HDMI CEC compliant devices.
[Disc Lock]
Sets play restriction for specifi c discs. Before you
start, place the disc in the disc compartment
(maximum 40 discs can be locked).
[Lock] – Restricts access to the current
•
disc. Once activated, a password is needed
to unlock and play the disc.
•
[Unlock] – Plays all discs.
Tip
•
You can set or change the password (see 'Adjust
settings' > 'Preferences' > [Password] ).
[Display Dim]
Changes the brightness level of the display
panel on this Home Theater System.
[100%] – Normal brightness.
•
[70%] – Medium brightness.
•
•
[40%] – Dimmest display.
[OSD Language]
Selects the default on-screen menu language.
[Screen Saver]
Turns off or on the screen saver mode. Helps to
protect the TV screen from being damaged due
to over exposure to a static image for too long.
•
[On] – Sets the screen saver to appear
after 5 minutes of inactivity (for example, in
pause or stop mode).
[Off] – Disable screen saver mode.
•
EN
39