Needle Bar, Presser Bar And Thread Take-Up Lever - Janome MC400E Service Manual

Move the carriage to the home position and turn off the power switch and/or unplug the machine before oiling the
machine.
• Wait until the motor cools down before oiling.
• Do not oil any parts other than as explained in this section.
• Use good quality sewing machine oil.
• One or two drops of oil is sufficient.
• Remove excess oil, otherwise it may stain fabric.
Remove the face cover (refer to page 1).
Oil the arrow points as indicated in the illustration.
Oil the needle bar, presser bar and thread take-up lever
Oiling the Machine (1)
Presser bar
Needle bar
Thread take-up
lever
31
MC450e