Printed Circuit Board F - Janome MC400E Service Manual

Replacing the Printed Circuit Board F
Front cover

Printed circuit board F

To remove:
1. Remove the face cover, bed cover and front cover (refer
Setscrews (A)
2. Disconnect the connectors for printed circuit board F
3. Remove the 2 setscrews (A) and remove the printed
To attach:
4. Follow the above procedure in reverse.
NOTE:
Refer to page 18 to locate the connectors.
19
to pages 1, 3 and 4).
from the printed circuit board A.
circuit board F.
MC450e