Table of Contents
Advertisement
3.) View the image of the camera over the network.
4.
Loosen the screws on the bracket slightly.
NOTE: The "bottom" mark on the mounting base should align with the "bottom" mark on the
mounting bracket.
5.
Adjust the camera to the desired surveillance angle and then tighten the screws on bracket to fix the camera.
Rotation screw
6.
Loosen the lock screw on the sun shield and move the sun shield until you can remove it. Remove the sun
shield.
Vertiv | Network Camera Quick Operation Guide | v01 | UD.6L0201D0146A02
Tilting screw
Figure 2-3 Adjust Monitoring Angle
Figure 2-4 Remove the Sun Shield
Panning screw
5
Hide quick links:
Advertisement
Table of Contents
