Table of Contents
Advertisement
3.2.2 Charging via Personal Computer with USB Cable
The TPMS trigger tool can also be charged through the USB port.
To charge via USB cable
1. Insert the small end of the USB cable to the USB port at the right side of the TPMS trigger tool
and the large end to a computer.
3.3 Application Overview
When the TPMS trigger tool boots up, the Main Menu displays. This screen shows all applications
loaded on the unit.
The following applications are preloaded into the TPMS trigger tool
TPM Sensor Activation – leads to screens for activating TPM sensors.
●
RKE&RF Monitor – leads to screens for checking RF Remote Keyless Entry (key FOB).
●
Settings – leads to screens for adjusting default settings to meet your own preference.
●
Tool Information – leads to screen of information about your trigger tool.
●
Latest Test – leads to screens for access the last tested sensor data.
●
3.4 Tool Symbols and Icons
This section provides a brief introduction of symbols and icons of tool display.
No.
1
2
3
4
5
6
7
8
Figure 3-1 Sample Home Screen
Indicator
Indicates current selected menu item.
Indicates there is data stored in the tool
Indicates internal battery volume.
Indicates the TPMS tool is sending signals to
the tire sensor for activation and test.
Indicates battery charging.
Indicates One Wheel test mode is selected.
Indicates ALL Wheels test mode is selected.
Indicates magnet is required to activate TPMS
sensor.
NT1001 TPMS Trigger Tool Manual_English_V1.01
Description
12
Advertisement
Table of Contents
