Sony BPU4000 Operation Manual page 32

Page name
Page No.
<BOARD STATUS>
D02
<CONNECTION
STATUS>
D03
<ROM VERSION>
D04
<SERIAL NO>
D05
<IP ADDRESS>
D06
<LAN STATUS>
D07
<CNS STATUS>
D08
32
Menu Settings
Item Set value
SY OK, NG
DVP OK, NG
TX OK, NG
DPR1 OK, NG
DPR2 OK, NG
CHU DOCKING OK, NG, ---
POWER OK, NG, ---
CABLE OPEN, CONNECTED
COMM OK, NG, ---
CSA CABLE OPEN, CONNECTED
COMM OK, NG, ---
CCU CABLE OPEN, CONNECTED
COMM OK, NG, ---
CAMERA APP Version number, date, device name ROM version information installed on each device
OS OS version
UPDATER Version of software updater
SY Vx.xx
TX Vx.xx
DEC Vx.xx
DPR1 Vx.xx
DPR2 Vx.xx
4K-POST Vx.xx
2K-POST Vx.xx
SDP Vx.xx
MODEL Model name
NO Serial number
OPTION Option name
IP ADDRESS 0.0.0.0 to 255.255.255.255
SUBNET MASK 0.0.0.0 to 255.255.255.255
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255
MAC ADDRESS 00:00:00:00:00:00 to
FF:FF:FF:FF:FF:FF
AUTO NEGOTIATION OFF, ON
CONNECTION 10M, 100M
SPEED
DUPLEX MODE HALF, FULL
LINK CONDITION DOWN, UP
CNS MODE LEGACY, BRIDGE
Meaning
Internal board status
Video camera connection status (not displayed for
HDC4300 connection).
---: When camera system adaptor is not connected.
Video camera power status (not displayed for
HDC4300 connection).
---: When DOCKING is NG or camera system adaptor
is not connected.
Video camera cable connection status (not displayed
for HDC4300 connection).
Communications status of the video camera.
---: When DOCKING is NG or camera system adaptor
is not connected.
Camera system adaptor connection status (not
displayed for HDC4300 connection)
Camera system adaptor communications status (not
displayed for HDC4300 connection)
---: When CABLE is OPEN.
CCU connection status
CCU communications status.
---: When CABLE is OPEN.
ROM version of SY board
ROM version of TX board
ROM version of DVP board
ROM version of DPR1 board
ROM version of DPR2 board
ROM version of DVP board
ROM version of DVP board
ROM version of DVP board
Displays the installed options.
IP address of the unit (display only)
Subnet mask (display only)
Gateway IP address (display only)
MAC address of the unit (display only)
Auto negotiation setting
Connection speed
Duplex mode setting
LAN connection status
Communications mode setting