Extension Mode Connection - Sony BPU4000 Operation Manual

Device Setting
HDCU2000/ Image format settings
2500
Video output connector
settings
Transfer rate settings
CA4000 Prompter output
connector settings

Extension Mode Connection

The unit can be used to form a video signal extension system
by connecting it to a video camera (F65
CA4000) using an optical fiber cable.
The system can be synchronized because using the external
genlock function.
Intercom systems and multi-camera operation systems are not
supported.
An external power supply or power supplied from the CCU
connector of an HDCE-200 is also required for the camera,
since power is not supplied from the unit.
Connection example
External power supply
BPU
INTERCOM AUDIO IN DC IN
PUSH PUSH
DC OUT
AES/EBU
LINE MIC
+48V
OFF 3G SDI/HD SDI
RET CTRL TRACKER REMOTE AUX
Monitor
CA4000 SDI-MONI
HD-SDI Monitor
Remote Control Panel
RCP-1500/1501/1530
For details about assignment of BNC connectors, see "Relationship
between Connection Type and BNC Connector Assignment" (page 19).
Menu/Page
SYSTEM OPERATION/
<MULTI FORMAT>
SYSTEM OPERATION/
<OUTPUT FORMAT>
Can also be set using the control panel.
CCU CONFIGURATION/
<PROMPT/TRUNK>
MAINTENANCE/<SDI-OUT>
MAINTENANCE/<PROMPTER2 OUT>
1) 2)
or PMW-F55 with
Return video signal
Prompter signal, etc.
Sync signal input
LINK-1
SDI
OUT 1 OUT 3
3G/HD SDI OUT
REMOTE REFERENCE
IN OUT
SLOT3 3G/HD SDI OUT SLOT1 SDI OUT 1 SDI OUT 2
SLOT4 HD SDI OUT SLOT2 SDI OUT 1 SDI OUT 2
REMOTE SDI
OUT 2
HD-SDI Monitor
Item
FREQUENCY HD
HD-SD
DELAY
SLOT1 to
SLOT6
TRANSMIT
SDI-MONI
OUT
OUTPUT
HD signals down-converted from 4K signals or generated
normal speed signals from HFR video can be output from the
SLOT3 and SLOT4 outputs.
1) Requires an external power supply when the F65 is used in an
extension connection.
2) Requires the SKC-4065 F65 Adaptor.
Note
Extension mode connection is not supported when connected
to an HDC4300.
Optical fiber cable
LINK
LINK-3 LINK-4
-2
SDI SDI SDI
OUT 5 OUT 7
SDI2
SDI1
CAMERA
SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6 SDI OUT 7 SDI OUT 8
SDI OUT 3 SDI OUT 4 SDI OUT 5 SDI OUT 6
SDI SDI SDI
OUT 4 OUT 6 OUT 8
Monitor
(4K Quad Link)
Set value
Frame frequency
0-Delay, Frame (1F)
Video output format of
each slot
AUTO, HIGH BIT RATE
HD-PROMPT
PROMPTER2
Switcher
(4K Quad Link)
CAMERA
CCU
Connection and Setup
BPU4000
13