Troubleshooting Instructions - RetroSound Apache Installation And Owner's Manual

Troubleshooting Instructions:
Removing dust from underneath the protector:
Step 1 :
Place a piece of adhesive tape on the
corner of the protector closest to the dust particle
or air bubble and lift up.
Step 2:
Use a second piece of adhesive tape to.
remove the dust particle.
Step 3:
Once removed, lay the protector back
down on the screen, using a credit card or lint-free
cloth to remove any air bubbles.
Step 4:
Lastly, remove any remaining adhesive
tape.
Re-aligning your screen protector:
Step 1 :
Place a piece of adhesive tape on the
corner of the protector and use this as a tab to lift
off of the radio's screen.
** DO NOT touch the screen or application side of
the protector during this process**
Step 2:
Carefully Align the edge of the protector
to your radio's screen.
Step 3:
Use a soft cloth to secure the protector to
the screen and remove any remaining air bubbles
to ensure a proper mount.