Electrolux WASL6E202 User Manual page 20

Table of Contents

Advertisement

Available languages

Available languages

20
www.electrolux.com
10.9 Cancelling the delay start
1. Touch button Start/Pause - Départ/
Pause. The related indicator flashes.
2. Touch button Zeitvorwahl - Départ
Différé again and again until the
display tells that there is no delay start.
3. Touch button Start/Pause - Départ/
Pause. The programme starts.
10.10 Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
10.11 Interrupting a programme
and changing the options
You can change only some options before
they operate:
1. Touch button Start/Pause - Départ/
Pause.
The related indicator flashes.
2. Change the options.
3. Touch button Start/Pause - Départ/
Pause again.
The washing programme continues.
10.12 Cancelling a running
programme
1. Press button Auto Off to cancel the
programme and to deactivate the
appliance.
2. Press button Auto Off again to
activate the appliance.
Now, you can set a new washing
programme.
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
new time value.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.13 Opening the door
WARNING!
If the temperature and level of
the water in the drum are too
high and the drum still rotates
you cannot open the door.
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button Start/Pause - Départ/
Pause.
The door lock symbol in the display goes
off.
2. Open the appliance door.
3. Close the appliance door and touch
button Start/Pause - Départ/Pause.
The programme or the delay start
continues
10.14 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display
comes on and a message
tells you that the programme is
completed.
The indicator of Start/Pause - Départ/
Pause button goes off.
1. Press the button Auto Off to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.

Advertisement

Chapters

Table of Contents
loading

Table of Contents