Product Identification - Festo FED-40 Manual

1 Introduction
1.2

Product Identification

Festo FED-... en 1107g
The product may be identified through a plate attached to the
rear cover. You will have to know the type of unit you are
using for correct usage of the information contained in the
guide.
An example of this plate is shown in the figure below:
Fig 1/1:
FED-50
123456
HW V xx
SW V xx
FW xx
Product model name
Festo part number
hardware version of the product
software version of the product
firmware release
1-2