Command Summary - Festo FED-40 Manual

4 Getting Started
4.1

Command Summary

CLEAR
4-2
The chapter describes the keyboard commands recognized by
FED panels. Commands are classified according to the
operating modes of the unit.
Please note
The standard command assignment is described in this
chapter. All the commands, except those defined for
Configuration Mode, can be modified, deleted and/or
extended using the Keyboard Macro Editor facility of the
programming software.
Panels with touch screen will show system defined touch keys
on the screen whenever it is required (Figure 4/1).
Default touch keys for the panels with touchscreen
Fig 4/1:
Some of the keys described in this chapter may not be
available in each FED model. The functions assigned to them
may, however, be implemented using the Keyboard Macro
Editor or using an alternative predefined key. Models without
numeric keypad allow numeric data entry using arrow keys
and/or using the Keyboard Macro Editor.
Please note
The text '2 s' assigned to a key means that the key has to be
held for two seconds to activate the associated function.
ENTER
Festo FED-... en 1107g