Models Without Pc/Printer Port - Festo FED-40 Manual

3 Installation

3.7.1 Models without PC/printer port

Festo FED-... en 1107g
The FED-40, FED-50, FED-60, FED-300, FED-301, FED-400 does
not have the PC/Printer Port. The PLC Port is used here as a
combined PLC/PC interface. It can be used as a programming
port when the panel is in Configuration Mode. These models
can also be programmed with the FEDZ-PC standard
programming cable if you connect the sub-D adapter (gender
changer) directly to the PLC/PC interface of the FEDZ-PC cable.
This is supplied with the FEDZ-PC cable. It is possibly
necessary to remove the screws from the gender changer.
A printer cannot be connected to the FED-40, FED-50, FED-60,
FED-300, FED-301, FED-400.
3-26