Starting A Programme; Opening The Door - Electrolux EWF 1287 HDW User Manual

16 www.electrolux.com
activate an option, the indicator of the
set option comes on.

10.7 Starting a programme

without the delay start
Press
• The indicator of
• The indicator
• The programme starts, the door
• The drain pump can operate for a
10.8 Starting a programme with
the delay start
1. Press
display shows the delay you want to
set.
The related indicator comes on the
display.
2. Press
• The appliance starts the
• When the countdown is
If you set something
incorrect, the display shows
the message
.
and stays on.
starts to flash on
the display.
locks, the display shows the
indicator .
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the
programme duration
agree with the laundry
load.
• The display shows the
new value.
again and again until the
:
countdown.
completed, the programme starts
automatically.
.
stops to flash
10.9 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press
The indicator flashes.
2. Change the options.
3. Press
The programme continues.
10.10 Cancelling a running
programme
1. Press the button
2. Press the same button again to

10.11 Opening the door

You can cancel or change
the set of the delay start
before you press the
cancel the delay start:
• Press
appliance to pause.
• Press
display shows
• Press
start the programme
immediately.
.
again.
to cancel the programme and to
deactivate the appliance.
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
CAUTION!
If the temperature and level of
the water in the drum are too
high and the drum still
rotates, you cannot open the
door.
. To
to set the
until the
'.
again to
for some seconds