Table of Contents
Advertisement
CUC 1828
2.2 Switching on with Programme "1" or "AV"
Reach the "Switch on with" menu with button " " via "DIALOG CENTER"
–> "SPECIAL FUNCTIONS". With the buttons
2.3 Picture/Sound Options On or Off for all Programmes
Reach this menu via "DIALOG CENTER" –> "SPECIAL FUNCTIONS"
by pressing button " ". When selecting "off" the scales indicating the
analog values do not appear.
2.4 "MEGALOGIC Info" (only if Megalogic feature is identified)
Reach the "MEGALOGIC Info" menu via "DIALOG CENTER" –>
"SPECIAL FUNCTIONS" by pressing button " ". With the buttons
the Megalogic function can be switched on or off.
2.5 "Timer function"
Appears only if a SAT module is identified in the television receiver.
Reach this menu via "DIALOG CENTER" –> "SPECIAL FUNCTIONS"
by pressing button " ". When the "Timer" is switched on - standby LED
is flashing - the set can be switched on and off at a predetermined time.
Manual entry is possible if no date or time is recognized.
2.6 AVL (Automatic Volume Limiter - only option)
The indication "Automatic Volume Limiter" appears only if the
MSP3410D (IC32300) with AVL function is identified in the set. When
selecting "on", the sound-IC reduces the volume internally to the
normal value if the volume level of a transmitter is increased (e.g.
increased DEVIATION during ads).
3. Open Service Settings
3.1 Colour Match
Reach the "Colour match" menu via "DIALOG CENTER" –> "SERVICE"
pressing button " " . With the buttons
programme basis.
If a PIP Module is retrofitted, select the PIP programme.
3.2 Noise Reduction P1...99 or 1...179 (with SAT Module)
Reach the "Noise reduct." menu via "DIALOG CENTER" –> "SERVICE"
pressing button " ". With the buttons
"weak", "auto" or "manual" for all of the programmes 1...99 or 1...179.
3.3 Decoder P1...99 or 1...179 (with SAT Module)
Call up the "Decoder" menu via "DIALOG CENTER" –> "SERVICE" with
button " ". With the buttons
it is possible to switch the decoder "off"
or "on" for all programmes. The "Manual" setting allows the decoder to
be switched to "off" or "on" for individual programmes dependent on the
manually entered option.
3.4 Picture Sharpness
Call up the "Picture Sharpness" menu with button " ". With the buttons
it is possible to adjust the picture sharpness in three steps for all programmes.
3.5 Decoder P. for Coded Transmissions
Call up the "Decoder Sound P." menu with button " " via "DIALOG
CENTER" –> "SERVICE". With the buttons
analog or digital decoder for scrambled transmissions to internal or
external switch-over on a per-programme basis.
3.6 IR Data Programmer
Reach the "IR-Dataprogrammer" menu via "DIALOG CENTER" –>
"SERVICE" pressing button " ". The IR Data Programmer 2 makes it
possible to store a maximum of 99 programme positions with the data
for channel, TV standard, Peri, 4-place station identification, fine tuning
center frequency, and the volume offset "0" using the "OK" button.
The Programmer AP transfers only the channels and 4-place station
identifications with fine tuning center frequency and volume offset "0".
3.7.1 Picture Format Selection via Station Ident BLD and WSS
The picture format can be switched over with remote control button
"
" in dependence of the size of the picture tube.
In "auto" mode, the format is automatically changed accordingly with
every change of the status (Wide Screen Signal Bit) via the Black Line
Detector in dependence of the transmitter information.
3.7.2 Picture Format Selection with AV Switching Voltage Evaluation
The TV set selects the picture format in dependence of the voltage
applied to Pin 8 of the active Scart socket. On AV operation, the format
switching function is active for the black and orange AV socket (AV1,
AV 2).
GRUNDIG Service
select "Progr" or "AV".
the luma delay is set on a per-
the noise reduction can be set to "off",
it is possible to set an
for 16:9 picture tubes
Picture format
New picture format
before voltage
after voltage change
change
Pin 8: 0/12V –> 6V
16:9
-
Cinema Zoom
16:9
Panorama Zoom
16:9
4:3
16:9
* the expression "old format" means the picture format last selected
manually before the voltage is switched over.
4. Service Settings for the Dealer
4.1 Switching Off Blue Background of Screen
Press button " " to reach the menu "for authorised dealer" via "DIALOG
CENTER" –> "SERVICE" –> Code Number "8500". Press the yellow button.
After switching over the programme, the blue background is switched off.
Switching off the set cancels this function.
4.2 AFC Reference
Tune in to a station in band I with standardized channel raster and
without fine tuning. Reach the "AFC reference" menu via "DIALOG
CENTER" –> "SERVICE" –> "for authorised dealer" –> Code Number
"8500" pressing button " ". On pressing the "OK" button the automati-
cally determined AFC value is indicated (see Alignment chap. 1.4).
4.3 White Balance
Reach the "White bal." menu via "DIALOG CENTER" –> "SERVICE"
–> "for authorised dealer" –> Code Number "8500" pressing button
" ".The values for "green" and "blue" can be adjusted with the
buttons (see Alignment chap. 1.7).
4.4 Colour Decoder
Call up the "Colour decoder" menu via "DIALOG CENTER" –>
"SERVICE" –> "for authorised dealer" –> Code Number "8500" press-
ing button " ". Activate the setting VPC3211A.
4.5 Type of Picture Tube
Via "DIALOG CENTER" –> "SERVICE" –> "for authorised dealer" –>
Code Number "8500" –> "Tube type", the type of tube will be set (see
Alignment chap. 1.9).
4.6 Preprogramming the SAT Module (only with SAT Module)
"SAT preprogramming" via "DIALOG CENTER" –> SERVICE –> "for
authorised dealer" –> Code Number "8500" –> confirm with "OK"
button. In doing so, the SAT channel table stored in EPROM IC80060
is read out after replacement of EEPROM CIC3830 (SAT Module) for
example.
4.7 Geometry
Reach the "Geometry" menu via "DIALOG CENTER" –> "SERVICE"
–> "for authorised dealer" –> Code Number "8500" pressing button " ".
Adjust the picture geometry with the geometry test pattern (see
Alignment chap. 1.12).
5. Sound Settings in the Dialog Center
5.1 Sound Switching:
Call up the "Sound settings" menu with the blue button. Different types
of "Sound" are available dependent on the standard:
- "Mono": in the case of pure mono transmissions
- "Mono A / Mono B": in the case of 2-channel sound transmissions
- "Stereo / Mono": in the case of poor stereo sound quality, the sound
can be switched over to mono
- "Nicam / FM"
- "Nicam A / Nicam B / FM"
- "Nicam Stereo / FM"
5.2 Headphone Sound Switching
Call up the "Sound settings" menu with the blue button. Dependent on
the TV standard, different settings for the "Headphones" are possible:
- "Mono A / B", independent of the loudspeakers
- "Nicam A / Nicam B / FM", independent of the loudspeakers
All other options do not allow to set the sound for the headphones and
loudspeakers separately.
5.3 AV Sound
Pre-set: Stereo
Switching possibilities: Mono A, Mono B and Stereo again.
Allgemeiner Teil / General Section
New picture format
after voltage change
Pin 8: 6V –> 0/12V
old format *
-
-
-
1 - 23
Advertisement
Table of Contents
