Advertisement
Quick Links
10
CL 46610005/13G
1
5
3
2
4
12
13
CL 76610012_002.AI
100697
CL 76610012_001.AI
00697
15
14
100m
200m
0
1
0-50m
300m
0
1
CL 76610012_003.AI
Figure A
Technical specification
CCD CAMERA
Pick-up device
1/3" (Solid state CCD)
No. of picture elements
(H) x (V)
512 x 492 (EIA)
512 x 582 (CCIR)
Horizontal resolution
> 380 TVL
Light sensitivity
0.5 ~ 30000 lux
Spectral sensitivity range
400 ~ 1000 nm
Signal to noise ratio
> 48 dB
Output A/V
RJ 11 E modular 'telephone'
socket
Built-in microphone
electret
Lens type
integrated
Lens viewing angle
59°H x 46°V
focal length
4 mm
relative aperture
F 2.0
focus range
1 ~
m
Power supply
16 ~ 27 V
(via system cable)
DC
Power consumption
50 mA (at 24 V
)
DC
System cable
4-wire dual twisted pair
'telephone' cable
Tripod socket
1/4" B.S.W.
Dimensions (WxHxD)
70 x 70 x 79 mm (incl. lens)
Weight
205 gr
Ambient conditions
Ammonia resistant
Ambient temperature
operating
+10 ~ +55 C
storage
-25 ~ +70 C
Ambient humidity
operating
20% ~ 90%RH
storage
99%RH
Specifications may be changed without notice.
53
CL 76610011_004.AI
5
4
3
2
4
5
2
3
4-5
4
5
3
2
2-3
5
4
3
2
4-5
2-3
Figure B
Advertisement
Related Manuals for Philips CCD
Summary of Contents for Philips CCD
- Page 1 200m 0-50m 300m CL 76610012_003.AI Figure A Technical specification CCD CAMERA Pick-up device 1/3" (Solid state CCD) No. of picture elements (H) x (V) 512 x 492 (EIA) 512 x 582 (CCIR) Horizontal resolution > 380 TVL Light sensitivity 0.5 ~ 30000 lux...
-
Page 2: Electromagnetic Compatibility (Emc)
Electro Magnetic Compatibility (EMC) This equipment complies with European rules for EMC according to EN55013, EN55020 and EN50082-1. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Installation
Observation Camera Introduction Your new CCD camera is developed for use with a special observation system monitor. It features a sensitive microphone thus registering both images and sound via the monitor, as well as input contacts for connecting external alarm devices. -
Page 4: Alarm Inputs
Alarm inputs The camera has a three-pole terminal block (fig. A-13) for connecting alarm sensors, such as doorcontacts. For normally open (N.O.) sensors, connect to contacts N.O.. For normally closed (N.C.) sensors, connect to contacts N.C.. Position First you need to determine where the camera is to be installed. The best results are obtained when the camera looks a little downwards and not into a bright source of light. -
Page 5: Protective Cover
Protective cover For outdoor use a protective cover (fig. A-10) (optional) has to be used to protect the camera from rain and snow. System connection Connect the system cable to the output of the camera (fig. A-12). The lens Caution: Do not touch the glass of the lens. This could damage the delicate coating on its surface. -
Page 6: Tips For Maintenance
Tips for maintenance Cleaning The outside of the camera can be cleaned with a moist fluff-free cloth or a shammy leather cloth. When cleaning the objective a special lens cleaning cloth should be used. Do NOT use cleaning fluids based on alcohol, methylated spirit, ammonia, etc..