Adjusting The Squeegee; Filling The Clean Water Tank - Vax VCSD-04 User Manual

Push the suction hose onto
suction hose entry port.

Adjusting the squeegee

Adjust the squeegee pressure fixing nodule (H) to adjust the pressure
of the squeegee with floor.
When perfectly adjusted the squeegee will form a 45⁰ angle with
the floor, sliding easily as it moves and bending in at all points.

Filling the clean water tank

• Fill the clean water
• Pour directly through
IMPORTANT: Only use Vax Commercial recommended detergents. The use of other chemical products may
not allow the machine to perform at its optimum capabilities.
Vax Careline: (UK) 0330 026 4275
! !
WARNING: Do not handle the squeegee with bare hands, wear gloves and any
! !
appropriate safety clothing needed to carry out the operation.
Never use the machine without the brush or if the brush is incorrectly fitted.
Adding detergent to clean water tank
tank using a hose or
similar tool.
the sponge filter of the
clean water tank filling
point into the tank.
Operation
• Remove the sponge
filter from the clean water
filling point.
• Fill with the correct amount
of Vax Commercial scrubber
drier detergent per litre as
indicated on the label.
• Ensure sponge is replaced
before starting machine.
11