Advertisement
Quick Links
V-036 Easy Guide
UK SERVICE & HELP - VAX CARE 0870 6061248
Monday to Frday 9.00am to 5.00pm. An answer phone is available out of these hours. If you have queries or concerns about using your VAX, call the HELPLINE. Calls are charged at the UK national rate.
Please make a note of the serial number and model number of your VAX before calling. There are over 400 approved VAX Service Agents in the UK . For your nearest Service Agent, please call VAX Care.
Advertisement
Related Manuals for Vax SWEEPER VAC V-036
Summary of Contents for Vax SWEEPER VAC V-036
- Page 1 Monday to Frday 9.00am to 5.00pm. An answer phone is available out of these hours. If you have queries or concerns about using your VAX, call the HELPLINE. Calls are charged at the UK national rate. Please make a note of the serial number and model number of your VAX before calling. There are over 400 approved VAX Service Agents in the UK . For your nearest Service Agent, please call VAX Care.
-
Page 2: Parts Checklist
Parts checklist Hanging loop Dry cloths 11. Charging indicator On/off switch 10. Charger 12. Charger input Upper handle Lower handle Dust canister release button See-through dust canister Dry cloth head Cleaner nozzle... - Page 3 Putting your cleaner together Top view of cleaner Notches Insert the lower handle into the body of the unit and firmly push in until it locks Insert the upper handle into the lower handle of the unit and firmly push into into place.
- Page 4 Charging Storage NOTE: Only use the charger supplied. CHARGE 24 HOURS BEFORE FIRST USE. Connect the charger to a wall socket. Plug the charger end into the back of the unit. Use the storage hook to hang the cleaner up. NOTE: Hang in a place convenient for charging.
- Page 5 Operating the vacuum cleaner FOR ADVICE ON ELECTROSTATIC DRY CLOTHS, PLEASE CALL VAX CARE ON 0870 6061248. NOTE: This product is intended for dry pick up only. Do not attempt to vacuum up any liquids with this cleaner. Lift the vacuum nozzle. It should lock into position.
- Page 6 Operating the vacuum cleaner Use the dry electrostatic cloth to pick up fine debris like dirt, dust and pet hair. To turn the vacuum on: hold down the on/off button located on the handle. Use the vacuum to suck up any left-over debris. For best results, replace the dry Release the button to turn the vacuum off.
- Page 7 Dust canister and filter IMPORTANT: FOR BEST RESULTS, CLEAN THE FILTER AFTER EACH USE. For advice on filter replacement, please call VAX Care on 0870 6061248. Removing the dust canister Press the dust canister release button located above Grasp the centre tab on the filter and pull out of the Empty the contents into a waste bin.
- Page 8 Dust canister and filter Replacing the dust canister Slot Return the filter to the dust canister. Re-attach by aligning the tab on the dust canister with Tilt and push the dust canister until it locks into place. the slot on the body of the unit.
-
Page 9: Troubleshooting
2. Make sure handle is pushed firmly all the way into housing. 3. Battery dead - won’t hold a charge. 3. Call VAX Care on 0870 6061248. 4. Needs service. 4. Call VAX Care on 0870 6061248. 1. Dust canister is full. - Page 10 • Keep cloths out of reach of toddlers and pets to avoid accidental ingestion. • If your VAX fails to operate, never attempt to repair it yourself, as repairs carried out by an unauthorised or inexperienced person may cause injury to you or damage to your VAX.
- Page 11 (This page has been left intentionally blank)
- Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: VAX Limited, hereby on our own responsibility declare that the product Sweeper Vac is manufactured in compliance with the following: Safety: 72/23/EEC Low Voltage Directive as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic compatibility Directive as modified by 93/68/EEC VAX Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK...