Cadillac CT62018 Owner's Manual page 282

Warning
To reduce the risk of fire,
installations shall comply
with the requirements of
National Electric Code, ANSI/
NFPA 70 (USA), Canadian
Electrical Code CSA 22.1 and
IEC 60364 Electrical
installations in buildings,
depending on the region in
which the unit is being
installed. The installer shall
comply with any additional
local requirements mandated
by the country and/or
municipality.
Do not use this product if the
flexible power cord or the
electric vehicle cable is
frayed, has broken insulation,
or shows any other signs of
damage.
For Canada only: Not for use
in commercial garages.
Warning (Continued)
Do not use this product if the
enclosure or the vehicle plug
is broken, cracked, open,
or shows any other indication
of damage.
The plug must be plugged
into an appropriate electrical
outlet that is properly
installed in accordance with
all local codes and
ordinances. Do not modify
the plug provided with the
product. If the plug does not
fit the electrical outlet, have a
proper electrical outlet
installed by a qualified
electrician. If ground is
missing, the charge cord
indicators will indicate an
electrical system fault and the
vehicle may not charge.
DRIVING AND OPERATING
Charge Cord Status Indicators
After plugging in the charge cord, it
will perform a quick self test.
Verify the charge cord status. When
O
the indicator is lit solid green, the
charge cord is ready to charge the
vehicle.
The charge cord utilizes a
O
combination of the and
indicators to display the status of the
charge cord per the following table.
281
P