Cadillac CT62018 Owner's Manual page 247

246 DRIVING AND OPERATING
Warning (Continued)
Visibility is low, such as in
fog, rain, or snow conditions.
ACC performance is limited
under these conditions.
On slippery roads where fast
changes in tire traction can
cause excessive wheel slip.
: Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ : Press briefly to resume the
previous set speed or to increase
vehicle speed if ACC is already
engaged. To increase speed by 1 km/h
(1 mph), press RES+ to the first detent.
To increase speed to the next 5 km/h
(5 mph) mark on the speedometer,
press RES+ to the second detent.
SET : Press briefly to set the speed
and activate ACC or to decrease
vehicle speed if ACC is already
engaged. To decrease speed by 1 km/h
(1 mph), press SET to the first detent.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
press SET to the second detent.
: Press to disengage ACC without
erasing the selected set speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
The speedometer reading can be
displayed in either English or metric
units.
See Instrument Cluster (Base Level)
0 127 or Instrument Cluster (Uplevel)
0 130. The increment value used
depends on the units displayed.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
A Driver Information Display (DIC)
message displays. See Vehicle Messages
0 169.
ACC Indicator Regular Cruise
Control Indicator
When ACC is engaged, a green
indicator will be lit on the instrument
cluster. When the regular cruise
control is engaged, a green
indicator will be lit on the instrument
cluster.
When the vehicle is turned on, the
cruise control mode will be set to the
last mode used before the vehicle was
turned off.
.