en Operating the appliance
Eco drying
If you have selected the Eco 50°
programme, the door opens
automatically when the programme
ends. This ensures a particularly
economical drying result.You can switch
Eco drying on ©:‹‚ or off ©:‹‹.
Notes
Eco drying is activated only in
■
conjunction with the Eco 50°
programme.
Eco drying is deactivated when
■
ExtraDry is switched on.
–
the Eco 50° programme has
–
been selected in conjunction with
one or more additional functions.
the electronic child-proof lock *
–
has been switched on.
* depending on the features of your
dishwasher
Switching on the appliance
Turn tap fully on.
1.
Switch on ON/OFF switch (.
2.
The Eco 50° programme has been
preset for environmentally friendly
operation whenever the appliance
starts. This programme remains
selected if no other programme
button 0 is pressed.
Press START button h.
3.
Programme sequence starts.
32
Note:
For ecological reasons the Eco 50°
programme is preset whenever the
appliance starts. This conserves
environmental resources and not least
saves you money.
The Eco 50° programme is a
particularly environmentally friendly
programme. According to EU
regulation 1016/2010 it is the
"Standard programme" which is the
most efficient standard cleaning cycle
for cleaning normally soiled utensils in
terms of the combined energy and
water consumption for cleaning these
types of utensils.
Time preselection *
* depending on the configuration of
T i m e p r e s e l e c t i o n
your specific dishwasher
You can delay the start of the
programme by up to 24 hours.
Here's how to set up the delay:
Switch on ON/OFF switch (.
1.
Press the timer programming button
2.
X - or +.
The display window )" shows
‹‹h:‹‹m.
Keep pressing the timer
3.
programming button X - or + until
the desired time is displayed.
Press START button h.
4.
The delay timer has been activated.
To clear the specified delay, press
5.
the button X - or + repeatedly until
the display window )" shows
‹‹h:‹‹m.