Overview Of Menu - NEFF S series Instruction Manual

en Getting to know your appliance

Overview of menu

The dishwasher has been preset with
certain settings for your convenience.
The settings can be found in the
individual chapters. You can change
these factory settings.
Here's how to change the settings:
Switch on ON/OFF switch (.
1.
Press and hold the ‹ button
2.
for 3 seconds.
In the display window )" you will
see •:‹... and ' .
Setting up
• Water hardness
•:‹‹ - •:‹ˆ
§ Rinse aid
§:‹‹ - §:‹‡
†" Sensor setting
†":‹‹ - †":‹ƒ
š ExtraDry
š:‹‹ - š:‹‚
' Hot water *
':‹‹ - ':‹‚
˜ Auto Power Off
˜:‹‹ - ˜:‹ƒ
" EmotionLight *
":‹‹ - ":‹‚
† TimeLight *
†:‹‹ - †:‹‚
‚ Infolight *
‚:‹‹ - ‚:‹‚
* depending on the configuration of your specific dishwasher
12
Factory setting
•:‹...
§:‹†
†":‹‹
š:‹‹ / Off
':‹‹ / Off
˜:‹‚
":‹‚ / On
†:‹‚ / On
‚:‹‚ / On
Press the ‹ button to access
3.
the individual settings.
Adjust the setting using the buttons
4.
+ and - P.
Press and hold the ‹ button
5.
for 3 seconds.
The chosen setting has now been
stored in your dishwasher.
Tip: If you want to change a number of
settings, first make all your changes one
after another. Then press the ‹
button for 3 seconds. All the settings
will then be stored in the dishwasher.
Description
Setting water hardness. When using
Multitabs, select the lowest setting.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Adjustment of soiling detection for
optimum cleaning result.
Improved drying for glasses and plastic
tableware.
The dishwasher can be connected to
either hot (40-60°C) or cold water
(<40°C).
Appliance automatically switches off at
the end of each wash.
Interior light.
While a programme is running, status
information is projected onto the floor.
Light is projected to signal an active
washing cycle.